A Radio Subversion #5 - Ships, Planes, and Hams - The VHF Mirror Band

A More Useful FM/VHF Spectrum 

In our last post, we plunged our subverted CF210SP radio down into the deserted longwave band to track natural lightning sferics and demonstrated what can be done with a modified toy radio - when we bend its circuits to our will. Today, we are flipping the FM band switch, sliding the antenna all the way out, and checking out  the high-frequency VHF/NBFM utility spectrum we built. 



I wanted to silence the FM band - since the powerful commercial stations audio leaks into our quiet LF/AM band due to the FM section is always on cross coupling into the audio amplifier.  

My first thought was to change it to air band only.  Quick calculations determined swapping out the original coil for a 6-turn coil should do the trick and it did work.  the 108 MHZ FM station was at the very bottom of the dial and some aircraft and tower were heard.  The slope detection of AM is not ideal and the audio is scratchy.  So I went to plan B - Put the NOAA weather broadcast band on the FM dial! 

By performing a complete "dual coil-ectomy"—swapping out the factory inductors for our custom 4-turn local oscillator coil (L2) and moving the 6-turn coil to the front-end filter coil (L1)—we have successfully dragged the budget CD9088 FM chip out of the commercial music band and forced it to look at the 156–162 MHz maritime and weather frequencies.

But as we discussed in the theory section, this budget silicon doesn't just tune a new band—it folds reality in half. Because of the chip’s tiny 70 kHz internal intermediate frequency (IF) and its lack of image rejection, we have accidentally engineered a beautiful mathematical glitch I call: The Inverted Mirror Dial.  

But that gave us more bands to explore - even with this tiny dial.


Deciphering the Folded Mirror Dial

When you move the tuning wheel across our new
custom laminated slide-rule display, you aren't tracking a straight linear line from point A to point B. Instead, the radio's local oscillator is slicing through the air like a high-speed digital switch, mapping two entirely different real-world frequency bands onto the exact same physical dial tracks.


The Dual VHF Band is on the Left

At the very top of the dial sits our physical tuning anchor: the local robotic voice of the NOAA Weather Radio network on  or about 162.4 MHz. 

This is my anchor - it broadcasts 24-hours a day and I am lucky the tower is only a few miles from my lab but it is  pretty audible and appropriate for a weather themed Sferics monitor. 

But as you move the the tuning knob down the track, the math of the local oscillator forces lower frequencies to populate on the opposite side of the mirror. so we get Hams and Aircraft - three bands for the price of one.  

Then I heard air band AM again I was a bit confused what was going on -  but soon figured it out. 

Finding #1: NOAA  Weather & Maritime  VHF/NBFM Radio Traffic 

Parking the dial pointer near the top edge  locks onto the automated NOAA broadcast. The signal is pretty good.  


Now moving down the dial, right around to the calibrated 156.8 MHz mark, sometimes the background static drops out— the LED  drops out by carefully tuning around the found null we can also now receive local maritime communication on Marine Channel 16. Hearing ship captains fishing boats, and coastal traffic through a modified nine-dollar soldering kit feels kind of subversive.

There is no squelch, so as soon as the carrier drops that static rush returns. Weaker stations tend to flash the LED in coordination to the voices as a bonus  - fun to watch. 

Finding #2: High-Flying Aviation & Slope Demodulation

Further down the dial sweep, around the 120.4 MHz mark, the radio aviation audio from air traffic control centers to airplanes. 


The technical trick: Aviation traffic uses Amplitude Modulation (AM), but our CD9088 chip is a dedicated Frequency Modulation (FM) receiver as discussed. 

We are exploiting a trick called AM Slope Demodulation. By intentionally tuning the radio slightly off-center from the aircraft's actual broadcast frequency, we position the signal right on the steep, sloping edge of our receiver's internal FM filter curve. As the aircraft's AM voice signal changes in power (amplitude), it inadvertently slides up and down that filter slope, translating the amplitude changes into frequency shifts that the FM chip can decode.  

The audio requires running our volume potentiometer at that 90% to 100% maximum limit we also talked about in the build notes, not perfectly,  but the voices can be heard right through some static!

Finding #3: "Only in SoCal" – The 2-Meter Ham Repeater Intercept

The absolute best catch on the entire dial materialized right around the 146.0 MHz mark on the mirror scale, which maps directly to the active 2-Meter amateur radio band. 


I tuned right into the middle of a local Southern California ham repeater network. Expecting to hear a technical discussion about repeaters or  antennas or new transceiver hardware, I instead caught a group of local hams casually having an incredibly passionate conversation debating their favorite legal cannabis dispensaries and flavors. 

Only in Southern California do you subvert a radio's mathematical architecture just to intercept a panel of licensed radio operators discussing their favorite local pre-rolls. It is completely legal, highly entertaining, and proof positive that our subverted receiver is working exactly as intended!

I had to google to figure out what the hell they were talking about! 

Finding #4: The 2-Meter Mystery Signal & The FLL "Ghost Tracker"

Every hardware subversion probably has its ghosts, and I found mine lurking right around the 146 MHz mark.  I intercepted a series of distinctive RTTY (Radioteletype) data bursts. They ran for roughly 6 to 10 rapid cycles, transmitting their digital telemetry, and completely vanished into the noise floor.

Could this have been a low-Earth orbit ISS or CubeSat satellite passing directly over the lab? However, the bursts even over multiple intervals revealed zero evidence of Doppler shift—the frequency wasn't drifting as it would from an object moving at 17,000 miles per hour. This was probably a fixed, local ground station or a digital automated node.

But, i thought about it more.  When we removed the 33kΩ factory mute resistor on Pin 1 and swapped in our 10kΩ pull-up modification does not completely kill the chip's internal Frequency-Locked Loop (FLL) tracking system! The 2-Meter Satellites tend to have not extreme Doppler Shift so maybe this little toy radio could have locked on and grabbed a few packets and hung on to the shifting frequency after all! 

We will never know for sure - I did not record the audio or date/time. But the real discovery here was what it revealed about our modified circuits were working. 

Finally...

That brings our multi-part subversion project to a close! We took a basic AM/FM,  consumer radio kit and forced it to monitor everything from long-distance lightning storms to maritime traffic, hams, and aircraft communications. 

If you followed along and built your own Ships & Sferics Monitor, let me know what you're hearing (or sniffing out) in your local area down in the comments! 

Until the next project...

...Stay Tuned!

Comments

Popular posts from this blog

The Radio Subversion #1: An Introduction to Ships & Sferics Modifications

A Radio Subversion #3 - Arts & Crafts, and Calibration

A Radio Subversion #4 - Sferics, Storms, and Low-Frequency Physics